1956-58 C1 Corvette Chassis
1956-58 C1 Corvette Perimeter Chassis set up with
Mustang II front cross member, center section and rear shock bar.
1956-58 C1 Corvette Rolling Chassis.
Note: Wait time on a perimeter chassis is usually 8 to 10 weeks.
Rear link arm set up
Rear coilover shocks
Front upper and lower control arms
Strut rods and bushings
Manual rack and pinion steering with tie rod ends and bushings
Mustang II spindles and brake brackets
5 lug rotors, bearings and seals
Front calipers and pads
Front coil springs
9" Ford rear housing with axles, bearings and seals
No center section
rear brake drums and loaded backing plates